A great way to save money is by learning how to hem pants with a serger. They are not only useful for hemming knit fabrics, but can also be used to finish your clothing for the final step. There are two different methods to do it: a manual or using a sewing machine.
If you’re short on time, you might want to consider a blind hem using a regular sewing machine. This is a much easier method to master, and will produce a surprisingly invisible seam.
The first step is to take the pants off and measure the inseam. This measurement is where the hem will go. Once you’ve found the hem length, mark it on the outside of the pant leg. You can use a pair of rulers or a tailor’s chalk to mark the line.
Next, find a suitable hemming device. You can opt for a needle, or you can use a quality sewing shears to trim off the extra fabric on your pant legs.
A good way to measure the hem is to use a sewing gauge. Measuring a hem is easy with a sewing gauge, as long as you leave a quarter inch seam allowance.
What Two Sewing Tasks Can a Serger Not Perform?
Contents
When it comes to sewing, what two tasks can a serger perform that a regular sewing machine can’t? While a sewing machine can sew topstitches, zig-zags, buttonholes and more, it cannot do everything a serger can.
What a serger can do is create a hem, trim a seam allowance, and make decorative stitching. A serger can also create an overlocking stitch, which means it creates a professional grade binding.
A serger is a handy tool. It helps prevent your fabric from fraying and unraveling, and makes a sassy seam that looks neat and tidy. However, if you’re looking for a serger, you should only use it on fabric that you know and trust.
The serger uses a lot of thread, which is why it’s best suited to woven fabrics. This allows the serger to create a neat and tidy hem and encase the entire seam allowance inside the thread casing.
A serger is a great choice for business owners, but not for the home sewist. A serger can save you a ton of time and allow you to complete projects quickly. But it may take some getting used to. Luckily, there are seven awesome serger projects for beginners that will get you started on the right foot.
Do I Need a Ballpoint Needle For My Serger?
There are a variety of needles available for sewing. Each needle is designed to work on a different type of fabric. These include ball point, stretch, and sharps needles.
Ball point needles are designed to sew knit fabrics. They are made with rounded points that prevent damage to the fabric. The rounded tip also does not cut the yarns of the fabric.
Stretch needles are designed for stitching elasticated fabrics, such as lycra and spandex. They have a deeper groove than standard needles, which helps to eliminate skipped stitches. This is ideal for sewing swimwear, and is especially effective with poly-cotton thread.
Sharps needles are a bit smaller and slender in the eye. They are used for quilting with multiple layers of fabric.
The ballpoint point is not a specialty needle, but it can be useful in certain applications. Its rounded tip is perfect for sewing knits and other fabrics with a stretch factor.
If you are sewing a very dense fabric, such as denim, you may want to use a blunt point needle. This is because it has a stronger shaft. However, it is not recommended to use a regular sharp point on a heavy, dense fabric because it can cause crooked stitches.
How Do I Serge a Hem?
Using a serger to stitch a hem is an easy and quick way to enclose the raw edge of fabric, making a finished seam that is clean and pretty. You can also use contrasting thread to make your hem stand out. This method can be used to make a hem on sheers, scarves and other lightweight fabrics.
If you are new to using a serger to hem fabric, it is a good idea to practice. Use a test piece that is similar in size to the hem you want to create.
Begin by threading the serger with the correct stitch. The stitch you choose depends on the type of fabric you are sewing. For instance, if you are sewing a hem on a knit, a narrow-width stitch is best. On the other hand, if you are sewing a rolled hem on a woven, a decorative stitch is the best choice.
Next, position the fabric so that the serger can easily cut the edges. Set the serger to three-thread wide.
Then, set the looper to lower tension. This setting will pull the upper looper thread around the edge of the fabric, creating a neat rolled hem.
Can You Use a Regular Sewing Machine to Serge?
A serger is a machine that sews fabric along edges. However, you can also use a regular sewing machine to do the same thing. This is especially true if you want to do a topstitching job or hem a dress or shirt.
Although you can use a regular sewing machine to perform a variety of tasks, you will probably find that a serger offers you some advantages. For example, a serger is capable of a wider range of stitches and it also uses less thread, making it faster. Plus, you won’t have to worry about the fabric fraying.
Sergers can also sew a cover stitch, which is a stitch used to close an edge on a stretchy fabric. You can get a similar effect with a twin needle sewing machine.
While a sewing machine can do a few things, a serger can do them all, including overlocking and cutting. However, not all sergers are created equal. To choose the best model, you’ll need to consider the following.
In addition, you’ll have to figure out how to thread the machine. A good serger will have a color coded guide that will tell you which thread to use. Also, you should adjust the tension dials on each spool.
How Do You Serge Around Curves?
Sergers are great at sewing straight lines, but they can be a bit trickier when it comes to sewing around curves. Fortunately, there are some tricks to help make the process easier. These include using differential control, easing up on the lead foot, and practicing your technique on a scrap of fabric.
To begin, you’ll need to prepare your fabric by inserting it under the foot of your serger. It should be positioned in such a way that it can be sewn down the edge, without being too tight. For some fabrics, it’s also a good idea to clip the hem threads to prevent fraying.
Next, you’ll need to set your differential control for maximum gathers. This is the amount of fabric that can be gathered with the longest stitch length. If you’re working with a stretch fabric, you may want to use a different setting.
Once you’ve set your differential control, you’re ready to serge. You’ll want to run your stitches through at an angle, rather than straight down. Start by running a few inches past the new edge to secure the excess stitches.
What Does a Serger Rolled Hem Look Like?
A serger rolled hem is a beautiful way to make a hemline. This stitch is typically used on light to medium weight woven fabrics. It is also often used on napkins, scarves, table linens, and decorative pillows. Creating a rolled hem with a serger is simple.
First, you need to set the blade and stitch width. This is done by turning a dial near the front of the machine. Changing the blade and stitch width settings depends on the fabric. For rolled hems, you will want to reduce the width of the stitches.
Next, you need to adjust the lower looper tension. During the roll process, the lower looper is tightened to reduce the amount of thread on the underside. You can do this by using an Allen wrench. Then, you need to loosen the upper looper to allow more thread to enter the stitch.
After adjusting the lower looper and stitch width settings, you can continue with the rolled hem. Depending on the type of cloth you are working with, you may need to tweak the needle size, stitch length, and differential feed.
How Do You Set a Serger For a Rolled Hem?
When sewing a rolled hem with a serger, you need to make sure to have the right settings. Most sergers have a basic setting for this stitch, but you can easily change it to achieve a variety of decorative edges.
The width and length of the stitch must be adjusted so that it creates the desired rolled effect. You can either use one thread or two threads to achieve the rolled effect.
Different fabrics react differently to rolled hems. Thin fabric does not roll as well as heavier fabric. So you should choose a needle that is a little larger than the thickness of your fabric.
Most sergers will allow you to set the width and length of the stitch. Adjusting the width of the stitch will affect how much of the fabric is being rolled.
To start the rolled hem, you will need to fold over a strip of fabric. Make sure that it is at least 1” wide and 2” long. Once you have finished folding the fabric, it should be ready for the serger.
Learn More Here:
1.) Pants Guides
