If you’ve ever retrieved your favorite pair of sweatpants from the laundry basket, only to find that the drawstring has disappeared, you know how annoying it can be. Luckily, there’s a quick and easy fix you can do to fix this problem!
First, take a large safety pin. Make sure it’s the biggest pin you can fit into your hole, and push it through the opening until it reappears on the other side.
Next, push and pull it through your waistband, using one hand to scrunch up the material and the other to pull it taut. When it reaches the other end, pull it out again and tie it off.
Alternatively, if you have a pair of pants with a single-loop drawstring (like hoodies), the simplest solution is to tie a “taut line hitch” knot. It might not be as fancy as a bow or a decorative wrap, but this knot makes cinching your pants a lot easier. It won’t wiggle in the wash, and it’ll keep the strings even on both sides of your shorts or hoodies.
How Do I Rethread My Drawstring Pants?
Contents
Drawstrings are a feature of many hoodies, sweatpants and shorts. They’re a great way to keep your clothes snug without having to use zippers or buttons. However, they’re also a pain to rethread when the string gets pulled out of its casing.
To rethread your pants, try using a safety pin. You’ll want to find the largest one that you can easily slide into your waistband channel, pinning one end of the string to the pin and pushing it into the opening.
After you’ve pushed the safety pin into the opening, work your fingers around the channel until the string is threaded through. Repeat until both ends are threaded back into the pants’ loop.
This method will work for any pair of pj pants, swim trunks or shorts that have a drawstring. You can even rethread a cord or ribbon in this manner. But remember, the best method is to use a safety pin for your drawstring pants. It will save you a ton of frustration! Plus, it’s much quicker than other methods.
Can You Fix a Broken Drawstring?
A drawstring is a great addition to many clothing items. It can help to keep your shorts, hoodies and pants in place, while also allowing you to wear them comfortably without causing them to fall down. However, if your drawstring becomes frayed or broken or it has slipped out of its casing, you may want to fix it.
The good news is that replacing the drawstring on most clothing items is very simple and requires only a few tools and some time. Most clothing stores and fabric/sewing shops carry a wide variety of replacement drawstrings for different types of clothing.
The easiest and most common solution is to replace the drawstring with an elastic drawstring cord. This type of cord is easy to thread through the drawstring casing and stretches out very nicely.
How Do You Fix a Frayed Drawstring?
When your drawstring pants aren’t working properly, it can be frustrating. Whether the frayed ends of the drawstring have become tangled, are slipping out of their casing, or just don’t look as good anymore, it’s time to fix them!
The best way to fix a frayed drawstring is to use a safety pin. A large one will help push the drawstring into the channel and prevent it from slipping out.
If you don’t have a safety pin on hand, a straw or coat hanger wire works well too. Just be sure to bend the hook at the end of the wire so that it won’t get stuck in the drawstring channel.
Another option is to replace the original drawstring with an elastic. This is a popular choice and it stretches nicely. However, it is important to make sure that the elastic is at the correct width for your clothing item.
If you’re unable to find an elastic drawstring replacement, try using a shoelace. These can be purchased at most fabric stores.
How Do You Rethread a String?
Rethreading a string is no small feat, especially if you have an old pair of sweatpants in the closet. Fortunately, the task is not as difficult as it sounds. To restring a cord, all you need is a few tools in the right sizes and a bit of elbow grease. The best tool for the job is a safety pin, and you should use a real one, not a fake one. You will also want a sharp pointy blade to cut the threads. A safety pin can be a little intimidating, so if you’re not confident in your needle-nosed skills, don’t be afraid to enlist the help of a professional. Once the task is done, you should enjoy your tidily threaded garments again. The most gratifying part is that you can actually see the results of your efforts!
How Do You Restring a Drawstring Short?
Drawstrings are a staple on many athleisure pieces, such as hoodies and sweatpants. But they can quickly slip out of the casing and become difficult to pull back in again. This is especially true after you’ve laundered the item and the string has become flimsy and hard to thread through the opening.
The solution to this problem is simple. Reddit user zjbird offers up this quick and easy method for restringing your favorite hoodie or shorts: Staple a straw around one end of the string, then push it back through the opening in the fabric and tie off the other end. This is a much quicker and easier way to restring your pants than trying to use something else, like a coat hanger or pen cap, which could easily get stuck in the cloth of your hoodie.
This method is also a great idea for other types of clothes with strings or ribbons, such as pajama pants or swim trunks. It’s also a good idea to add a couple of knots in the ends of your new string so that it won’t come out again as easily.
How Do You Fix a Broken String?
A broken string in your pants can be frustrating. It may even mean you need a new pair of pants altogether. However, if you can’t afford to splurge on a new pair of pants, you can still fix the problem with some moderately deft hands and a few household items. This quick-and-easy fix is the ideal solution for those who want to get rid of a broken drawstring without having to fork out a bunch of cash. It’s a little more complex than you might expect, but it’s not difficult to perform. The most successful results come from using the right tools for the job.
Learn More Here:
1.) Pants Guides