If you have ever put a pair of sweatpants or a hoodie through the washing machine you know that they are prone to coming out of the dryer with their drawstrings unravelled. It can take several minutes of fumbling with the drawstring in order to thread it back through its casing, but with some careful planning, you can resurrect your favorite sweats with a little TLC.
The best way to ensure you don’t have to do it again is to reinforce the drawstring opening before construction. Using fusible interfacing works wonders.
In addition to the fusible interfacing, you will also want to make a drawstring casing that is slightly larger than the actual drawstring. The best part is that this will not only look neat, but it will also keep the drawstring in place. You might even be able to wear your new, re-stringed sweatpants right away! This is a great tip for pajamas, swim trunks, or any garment with a drawstring or ribbon. It will also save you a trip to the dry cleaners!
How Do You Restring Pants Easily?
Contents
When your pants’ drawstrings have come loose, it can be frustrating to try and put them back on. But restringing them is easy, and it takes a matter of minutes to do.
One way to fix the problem is to tie a knot in each end of the drawstring. This will make it impossible to pull one end through the hole and leave the other end stuck inside the waistband.
If this is not possible, you may be able to re-thread the drawstring by using a safety pin. This is probably the easiest and oldest method of re-threading a drawstring.
The safety pin trick works best for strings that are longer than 6 inches in length. If they are shorter, you will have to use a threader to guide the strings through the drawstring channel.
Then, you can use the safety pin to bundle up the remaining string. When you have it all bunched up, you can then slowly work it through the drawstring channel. Repeat this process until the string is all re-threaded into the drawstring channel. Once it’s all re-threaded, you can remove the safety pin and your pants should be re-strung correctly.
How Do You Insert a Drawstring?
A drawstring is a long cord that pulls the fabric of a garment into a tighter, more secure fit. It’s usually hidden inside a casing, though it can also be woven through openings on the outside for a decorative effect.
When inserting a drawstring into a casing, it’s important to make sure that the opening is only slightly larger than the length of the cord. This will ensure that the ends of the drawstring can’t slip back into the casing during wear or laundering.
In addition, it’s a good idea to reinforce the back of any drawstring opening before sewing. Fusible interfacing is a great option for this, as it adds extra stability to the area where the pull of the drawstring will be applied.
For a finished look, stitch along the lower edge of the casing beginning and ending at the center front seam (where the buttonholes will be). This allows you to sew buttonholes and feed the drawstring through without leaving any open spaces on either side.
How Do You Install a Drawstring Elastic?
If you are planning on replacing a drawstring with an elastic, there are several things you need to know before you start. First, you will need to find a replacement elastic that is the right width for your pants or shorts. A too-thin strip of elastic may not be strong enough to hold up a drawstring, and a too-wide strip can pull apart when you stretch your pants or shorts.
You will also need to choose a drawstring length that is long enough to tie your ties and a generous enough length to fit the buttonholes on your waistband. Then, thread the elastic through the existing drawstring casing and tie a knot at each end.
Once you have finished this, it is time to insert the drawstring into your pants. One option is to use a tool that helps you feed the elastic through your casing. These tools can be quite inexpensive and come in a variety of shapes and sizes.
Can You Fix a Broken Drawstring?
There are a few ways to fix a broken drawstring. One of the simplest ways is to reknot it.
To reknot it, take the drawstring and pull both ends of the string to the side, knotting them together so that they cannot slip out again. It’s a quick and easy repair that only takes about 15 seconds at most, but it will make your pants or shorts look new again.
Another option is to use a safety pin or paper clip. This is a great trick for fixing drawstrings on hoodies and bags, as it prevents the string from coming out of the casing.
If you are having trouble feeding the safety pin through the casing, try using a straw. This will help you feel the safety pin through the thick fabric.
You can also try replacing the drawstring with elastic or an elastic drawstring cord. This is a great way to get rid of a broken drawstring and you can buy this kind at Joann’s or other fabric stores.
How Do I Put Drawstring on My Pants Legs?
To put the drawstring on your pants you will need a couple of things. First, you need to cut a strip of fabric that is about 3 inches wide by the same length as your low waist measurement (see below). Then, you need to sew it up using a fancy pants (okay, maybe not so fancy) topstitch. If you are feeling extra fancy, you can use a serger or zig-zag stitch to finish off the job. You will also need a good sized thimble and some patience to get it done. The best part is that you will have a pair of comfy looking new pants. You may even find yourself snatching them from your spouse and wearing them around the house without anyone knowing.
How Do You Properly Restring?
Drawstrings are useful in a wide variety of clothing, from casual pants to hoodies and dress waists. They’re used to cinch up the fabric and keep them in place, but sometimes they can get loose.
When that happens, you’ll want to know how to properly restring the drawstring so it stays put. The easiest way to do this is by using a safety pin.
First, pinch one end of the string and then run the safety pin through the hole in the drawstring channel. This should prevent the other end from falling out and causing a problem later on.
Once you’ve done that, you can use the same safety pin to pull the other end of the string through. Once it’s done, tie a knot in the end to secure it.
You’ll probably need a few extra supplies to do this, but they’re all fairly inexpensive and easy to find. You can even get a cording tool at your local craft or sewing store.
How Do You Replace a Drawstring?
Losing a drawstring can ruin a pair of sweat pants or hoodies, but it’s easy to replace them. All you need are a few basic tools and 15 minutes.
The first thing you need to do is find a safe way to push the drawstring through its casing without damaging it. The best method is to use a safety pin. If you don’t have one, you can also use a straw or coat hanger wire.
Once the safety pin is inside, bunch up the drawstring’s fabric until it’s a tight fit. Then push the safety pin forward, and continue bunching until you can pull both ends of the drawstring out of the casing.
You may need to repeat this step a few times until both ends of the drawstring are even. Once both ends are even, you can resew up the drawstring casing.
Another option is to use elastic, but it can be tricky to find a replacement that is the right width for your clothing. If the elastic is too thin, it can break on you or get stuck in a seam while you’re wearing the clothes.
Learn More Here:
1.) Pants Guides
